Number of Pages: 68

File Size: 1877 KB

File Type: MS Word & PDF

Chapters: 1 - 5

5,000.00

ABSTRACT
This project is about the Design and Construction of a Vehicle Tracking and Accident Alert System (VTAA) using GPS and GSM Technology. It comprises of integration between GPS receiver, microcontroller and GSM module, and of course the push button for accident alert activation. The combination of all this technology will produce our VTAA system. The GPS module receive the coordinate of the point at which the system is located, controlled by the user using command interfaces through GSM module as a transmitter and receiver of data. This project is of two basic parts, the hardware and the software development. The hardware development includes the GPS, Push button and the microcontroller wiring connection, and its integration with GSM module. The software development includes the programming of the microcontroller (ATMEGA 8) with the source code, GSM message command, the NMEA protocol command and Google map API achievement. This system is controlled by users with centralized command interface through text.
v
TABLE OF CONTENTS
DEDICATION ………………………………………………………………………………………………………………….i
DECLARATION OF ORIGINALITY ……………………………………………………………………………….. ii
CERTIFICATION ………………………………………………………………………………………………………….. iii
ABSTRACT…………………………………………………………………………………………………………………… iv
LIST OF TABLES ………………………………………………………………………………………………………… viii
LIST OF FIGURES ………………………………………………………………………………………………………… ix
ACRONYMS …………………………………………………………………………………………………………………..x
ACKNOWLEDGEMENT ……………………………………………………………………………………………….. xi
CHAPTER ONE …………………………………………………………………………………………………………….. 1
1.0 INTRODUCTION TO A TRACKING SYSTEM ………………………………………………………. 1
1.1 BACKGROUND OF THE PROJECT ………………………………………………………………….. 3
1.2 STATEMENT OF THE PROBLEM ……………………………………………………………………. 3
1.2.1 STEEPLE ANALYSIS ………………………………………………………………………………… 4
1.3 MOTIVATION …………………………………………………………………………………………………. 5
1.4 PROJECT AIM AND OBJECTIVES …………………………………………………………………… 5
1.5 SCOPE OF STUDY …………………………………………………………………………………………… 5
1.6 ORGANIZATION OF REPORT …………………………………………………………………………. 5
2 CHAPTER TWO ……………………………………………………………………………………………………… 7
2.1 LITERATURE REVIEW……………………………………………………………………………………. 7
2.2 BACKGROUND……………………………………………………………………………………………….. 7
2.2.1 HISTORY OF GLOBAL POSITIONING SYSTEM (GPS) ……………………………… 7
2.2.2 GSM TECHNOLOGY…………………………………………………………………………………. 8
2.2.3 GSM MODEM……………………………………………………………………………………………. 9
2.2.4 SUBSCRIBER IDENTITY MODULE (SIM)…………………………………………………. 9
2.2.5 AIRBAG SAFETY ……………………………………………………………………………………. 10
2.3 SURVEY OF THE RELATED WORK………………………………………………………………. 10
2.4 DIFFERENT TECHNOLOGIES USED IN TRACKING SYSTEM………………………. 15
2.4.1 ACTIVE AND PASSIVE TRACKING ……………………………………………………….. 15
3 CHAPTER THREE ………………………………………………………………………………………………… 19
3.1 METHODOLOGY …………………………………………………………………………………………… 19
vi
3.2 MAJOR COMPONENTS USED:………………………………………………………………………. 19
3.2.1 MICROCONTROLLER …………………………………………………………………………….. 20
3.2.2 GPS (GLOBAL POSITIONING SYSTEM) …………………………………………………. 23
3.2.3 GSM ………………………………………………………………………………………………………… 26
3.2.4 POWER SUPPLY……………………………………………………………………………………… 29
3.3 PROCEDURES OF DESIGN AND CONSTRUCTION ………………………………………. 30
3.4 WORKING PRINCIPLE OF THE VEHICLE TRACKING AND ACCIDENT ALERT 32
3.5 SYSTEM ARCHITECTURE…………………………………………………………………………….. 32
4 CHAPTER FOUR ………………………………………………………………………………………………….. 36
4.1 TESTING, ANALYSIS OF RESULTS AND DISCUSSIONS ……………………………… 36
4.1.1 HARDWARE ASSEMBLING AND TESTING: ………………………………………….. 36
4.2 RESULTS……………………………………………………………………………………………………….. 36
4.3 PERFORMANCE EVALUATION ……………………………………………………………………. 38
4.3.1 PERFORMNCE ANALYSIS USING DIFFERENT SIM ………………………………. 39
4.3.2 BENEFITS AND APPLICATION OF VAAT SYSTEM ……………………………….. 40
4.4 PROJECT MANAGEMENT …………………………………………………………………………….. 41
4.5 RISK MANAGEMENT ……………………………………………………………………………………. 43
4.5.1 HACKERS ……………………………………………………………………………………………….. 43
4.5.2 SURGE AND THUNDER EFFECT ……………………………………………………………. 43
4.6 ETHICAL ISSUES ………………………………………………………………………………………….. 43
4.6.1 PRIVACY ………………………………………………………………………………………………… 43
4.6.2 DATA OWNERSHIP ………………………………………………………………………………… 44
5 CHAPTER FIVE ……………………………………………………………………………………………………. 45
5.1 CONCLUSIONS ……………………………………………………………………………………………… 45
5.2 LIMITATIONS ……………………………………………………………………………………………….. 45
5.3 FUTURE WORK …………………………………………………………………………………………….. 46
5.4 DESIGN CONSTRAINTS………………………………………………………………………………… 46
5.5 CONTRIBUTION TO KNOWLEDGE ………………………………………………………………. 46
5.6 CRITICAL APPRAISAL………………………………………………………………………………….. 47
REFERENCES …………………………………………………………………………………………………………….. 48
vii
APPENDIX ………………………………………………………………………………………………………………….. 50
viii
LIST OF TABLES
Table 1: Comparism of Existing Project………………………………………………………………………………… 17
Table 4.1: SIM in GSM module fixed MTN …………………………………………………………………………….. 39
Table 4.2 SIM in GSM module fixed Airtel …………………………………………………………………………….. 39
Table 4.3: SIM in GSM module fixed GLO …………………………………………………………………………….. 39
Table 4.4: SIM in GSM module fixed 9MOBILE ……………………………………………………………………… 39
Table 5: Gang Chat illustrating project activities and duration ………………………………………………….. 42
ix
LIST OF FIGURES
Fig 2.1 airbag …………………………………………………………………………………………………………………. 10
Fig. 2.2: Telit GM862 module used for a tracking system ………………………………………………………….. 14
Fig.3.1: Block Diagram of Vehicle Tracking System ………………………………………………………………… 19
Fig. 3.2 pin diagram of microcontroller ATMEGA 8 (Atmel, 2013) …………………………………………….. 21
Fig. 3.4 Block and Pictorial Diagram of a Global Positioning System (Paralax, 2015) …………………….. 24
Fig 3.5 SIM800 (SIMCOM, 2015) ……………………………………………………………………………………….. 26
Fig. 3.6: SIM800 functional diagram (SIMCOM, 2015)……………………………………………………………. 28
Fig 3.6.1: SIM800 pin out diagram ………………………………………………………………………………………. 28
Fig 3.7 Power supply ………………………………………………………………………………………………………… 29
Fig 3.8 Pictorial representation of Power supply …………………………………………………………………….. 29
Fig. 3.9: complete Circuit Diagram of VAAT system ………………………………………………………………… 32
Fig. 3.10: System architecture …………………………………………………………………………………………… 34
Fig 4.1: view of project during testing and evaluation………………………………………………………………. 36
Fig 4.2: view of communication between user and VTAA system via text message…………………………… 37
Fig 4.3: View of location on website through Google map…………………………………………………………. 38
x
ACRONYMS
GPS Global Positioning System
GPRS General Packet Radio Service
SIM Subscriber Identification Module
HTTP Hypertext Transfer Protocol
GSM Global System for Mobile communications
EGSM Extended Global System for Mobile communications
DCS Digital Cellular Service
PCS Personal Communications Service
TTFF Time-To-First-Fix
CS Communication Service
PHP Hypertext Preprocessor
XML Hypertext Mark-up Language
WAMP Windows Apache MySQL PHP
GGSN Gateway GPRS Support Node
PCB Power Circuit Board
AT Attention commands
MISO Master in Slave Out
MOSI Master Out Slave In
SCK Clock Signal from master to slave
GND Ground Signal
GPIO General Purpose Input/output
MCU Microcontroller Unit
RISC Reduced Instruction Set Computer
MIPS Million Instructions per Second
ALU Arithmetic Logic Unit
EEPROM Electrically Erasable Programmable Memory
SRAM Static Random Access Memory
I/O Input/output
1
CHAPTER ONE
1.0 Introduction to a Tracking System
The vehicle tracking system is a total security and fleet management solution. It is the technology used to determine the location of a vehicle using different methods like GPS and other navigation system operating via satellite and ground based stations. Modern vehicle tracking system uses GPS technology to monitor and locate our vehicle anywhere on earth, but sometimes different types of automatic vehicle location technology are also used. The vehicle tracking system is fitted inside the car that provides location and the data can even be stored and downloaded to a computer which can be used for analysis in future. This system is an essential device for tracking car any time the owner wants to monitor it and today it is extremely popular among people having expensive cars, used as theft prevention and recovery of the stolen car. The data collected can be viewed via SMS [receiving the position coordinate} or on electronic maps via internet and software.
However, the high demand of vehicles has also increased the traffic hazards and the road accidents. Life of the people is under high risk. This is because of the lack of best emergency facilities available in our country. An automatic alert system for vehicle accidents is introduced in this project. This system which can detect accidents in significantly less time and sends the basic information to a defined contact (say next of kin and emergency dispatch Centre) within a few seconds covering geographical coordinates, the time and angle in which a vehicle accident had occurred. This alert message is sent to the central emergency dispatch server in a short time so that the emergency dispatch server will inform the ambulances which are near to that location, which will help in saving the valuable lives.
When the accident occurs the alert message is sent automatically to the central emergency dispatch server. The message is sent through the GSM module and the location of the accident is detected with the help of the GPS module. The accident can be detected precisely with the help of vibration sensor. This application provides the optimum solution to poor emergency facilities provided to the road accidents in the most feasible way.
The project, “Vehicle Tracking and Accident Alert System using GPS and GSM Technology” is designed and developed to accommodate the needs of today’s vehicle fleet company to keep track on their fleets. It is a very useful and versatile device, and in fact it is able to be used by
2
anybody with the need to keep track on their valuable goods, increase safety and not just by the vehicle fleets company. This chapter will be covering the general background of this project, its concept, objectives, scope and the problem statement.
A GPS-GPRS based tracking system gives all the specifications about the location of a vehicle. The system utilizes geographic position and time information from the Global Positioning Satellites in order to track the movement of the vehicle. Google Maps is used for mapping the location. The GSM modem fetches the GPS location and sends it to the server using GPRS. The device includes modern hardware and software components that help to track and locate automobiles both online and offline. A tracking system comprises mainly three parts- vehicle unit, fixed based station and database with software system (ASHUTOSH et al, 2014)
The integration of GPS and GSM was first established using SMS as a method of transmitting GPS coordinates. The inclusion of GPRS technology to transmit location coordinates to a remote server facilitates the tracking of object remotely using any computer connected to the web.
A GPS tracking unit is a device that uses the Global Positioning System to determine the precise location of a vehicle or other asset to which it is attached. A GPS receiver is operated by a user on Earth, it measures the time taken by radio signals to travel from four or more satellites to its location, it then calculates its distance from each satellite, and from this calculation it determines the longitude, latitude, and altitude of that position. By following triangulation or trilateration methods the tracking system determines the location of the vehicle easily and accurately (ASHUTOSH et al, 2014). Trilateration is a method of determining the relative positions of objects using the geometry of triangles. To “triangulate,” a GPS receiver accurately measures the time taken by the satellite to make its brief journey to Earth(less than a tenth of a second) and hence measures its distance from the satellite using the travel time of the radio signal. To determine the distance between it and the satellite, the measured time is multiplied by the speed of a radio wave that is 300,000 km (186,000 miles) per second (ASHUTOSH et al, 2014). The coordinates of latitude and longitude can be sent to the user on request via SMS, or it may be transmitted and stored in the database, using a cellular or satellite modem that is the GSM modem embedded in the unit. This enables the user to display the asset’s location on the Google map either in real time or later whenever the user wants the data for further analysis.
3
1.1 Background of the Project
A vehicle tracking and Accident Alert system consists of an electronic device installed on a vehicle so that it could be tracked by its owner or a third-party for its position. Most of today’s vehicle tracking system uses Global Positioning System (GPS) to get an accurate reading of the vehicle position. Communication components such as cellular (GSM) and satellite transmitter will be combined to transmit the vehicle’s position to remote user. Vehicle’s information can be viewed by using software on a computer. Vehicle tracking systems are commonly used by fleet operators for fleet management functions such as routing, dispatch, on-board information and security.
Other applications include monitoring driving behavior, such as an employer of an employee, or a parent with a teen driver. Vehicle tracking systems are also popular in consumer vehicles as a theft prevention and retrieval device. Police can simply follow the signal emitted by the tracking system and locate the stolen vehicle. When used as a security system, a Vehicle Tracking System may serve as either an addition to or replacement for a traditional Car alarm. The existence of vehicle tracking device then can be used to reduce the insurance cost, because the loss-risk of the vehicle drops significantly.
Vehicle tracking is also useful in many other applications such as Asset Tracking scenarios where companies needing to track valuable assets for insurance or other monitoring purposes can now plot the real-time asset location on a map and closely monitor movement and operating status. Meanwhile, in field sales mobile, the situation of sales professionals can easily access real-time locations. For example, in unfamiliar areas, they can locate themselves as well as customers and prospects, get driving directions and add nearby last-minute appointments to itineraries. Benefits include increased productivity, reduced driving time and increased time spent with customers and prospects.
1.2 Statement of the Problem
The global issue related to a constantly increasing crime rate needs to be urgently addressed by both developed and developing countries. In Nigeria, 2,000 cases of car theft in average are reported each year in [Nairaland.com, 2011], and the number is still increasing. If not recovered soon, stolen vehicles are generally sold, revamped or even burned if the resale price is considered to be too low. Once a vehicle is stolen, it becomes hard to locate it and track it, which considerably decreases the chances of recovering it. In this work, we propose the design and
4
implementation of a car tracking anti-theft system that will protect, secure vehicles. More so, the bad culture of private and commercial drivers accompanied with the poor roads and road trafficking in the country has in time increases the rate of casualties on the road so rapidly, 35% of death rate in Nigeria was caused by Vehicle accident and road casualties in the year 2016. This project is focused mainly to increase the chances of survival for the victims of these causalities as introduced earlier.
1.2.1 STEEPLE Analysis
STEEPLE Analysis is “a model for strategic decision that takes into consideration seven main macro-environmental factors in the activity of analysis, assessment and forecast of the impact of the decision to be made” (WEBERIENCE LLC, 2017). STEEPLE stands for societal, technical, environmental, ethical, political, legal and economic factors. In this project, I adopted STEEPLE model to analyze and assess the potential impact of my solution. The following table identifies the seven macro-environmental factors related to this project which include societal, technical, environmental, ethical, political, legal and economic factors.
Societal: Poverty, population growth and urban migration are considered among the main drivers of crime. In this context, rising thefts means rising demand and rising need for anti-theft sand accident alert solution.
Technological: The emergence of microcontrollers and single board Nano-computers in the past few years has enabled the design of efficient embedded system.
Ecological: Tracking, tracing and monitoring a vehicle help in analyzing drivers behavior. In fact, analyzing driving behavior makes it possible to lessen risks of accidents and decrease fuel consumption, thus, CO2 emissions.
Ethical: Ethics issues of liberty and privacy is a main concern in geo-location systems.
Political: In April 2016, the Minister of Transportation, Rt. Hon. Rotimi Amaechi made more efforts in dealing with criminal phenomena that threatens the security and serenity of citizens valuable in transport networks (Nairaland.com, 2016).
Legal: National Union of Road Transport Workers (NURTW) does not address in a direct and clear way their concern regarding the use of geo-location systems and I argue that the implementation of this will be of a huge benefit to the security and protection of their members and clients.
5
Economic: Nowadays, many companies tend to use fleet management solutions to lessen their transportation costs. Furthermore, insurance companies in Nigeria (Nairaland.com, 2014) start embracing and mandating anti-theft solutions as part of the conditions for insurance.
1.3 Motivation
The alarming rate of vehicle theft and road accidents was the major motivation for this project. I had been inspired to develop a solution since I was once a victim of a road accident. I believe this system if well implemented will help increase the chance of recovering stolen vehicles in essence increasing vehicle security. It also will increase the survival chance of accident victims through the accident alert system.
1.4 Project aim and objectives
The aim of this project is to Design and Construct a Vehicle Tracking and Accident Alert System using GPS and GSM Technology.
Objectives of this project are:
1) To study and investigate the basic operation of the GPS module.
2) To design the GPS/GSM and Push button based on the system.
3) To ensure design perfection through simulation and breadboard layout.
4) To implement the designed system on a hardware prototype.
5) To analyze the efficiency of the developed system.
1.5 Scope of Study
In this project, software and hardware developments were the major scopes put into consideration. The power supply unit (AC to DC) and wiring of the modules with the microcontroller defines hardware development. The software session on the other hand encompasses writing of source code to the microcontroller and generation of Google API to view position on Google map. The appropriate integration of this sessions cover the design and construction of the VTAA (Vehicle Tracking and Accident Alert) system
1.6 Organization of report
Chapter one presents the introductory part of this project work. The rest of this work is organized as follows: Chapter two reviews the current related literature to the work, while Chapter three describes the methodological approaches and design specifications. Chapter four presents
6
simulation results and analysis, followed by Conclusion, Recommendations, Limitations, and Future work directions in Chapter five.

DOWNLOAD THE FULL WORK

DISCLAIMER: All project works, files and documents posted on this website, UniProjectTopics.com are the property/copyright of their respective owners. They are for research reference/guidance purposes only and some of the works may be crowd-sourced. Please don’t submit someone’s work as your own to avoid plagiarism and its consequences. Use it as a reference/citation/guidance purpose only and not copy the work word for word (verbatim). The paper should be used as a guide or framework for your own paper. The contents of this paper should be able to help you in generating new ideas and thoughts for your own study. UniProjectTopics.com is a repository of research works where works are uploaded for research guidance. Our aim of providing this work is to help you eradicate the stress of going from one school library to another in search of research materials. This is a legal service because all tertiary institutions permit their students to read previous works, projects, books, articles, journals or papers while developing their own works. This is where the need for literature review comes in. “What a good artist understands is that nothing comes from nowhere. All creative work builds on what came before. Nothing is completely original.” - Austin Kleon. The paid subscription on UniProjectTopics.com is a means by which the website is maintained to support Open Education. If you see your work posted here by any means, and you want it to be removed/credited, please contact us with the web address link to the work. We will reply to and honour every request. Please notice it may take up to 24 – 48 hours to process your request.

WeCreativez WhatsApp Support
Administrator (Online)
I am online and ready to help you via WhatsApp chat. Let me know if you need my assistance.