ABSTRACT
A good system is needed to manage the submission of student assignment at the university. The manual system needs to be replaced with the computerized system to give more convenience to the student and the lecturer. When students hand over their assignment the operator will keep the records of the submission details. Emails will be sent to the students to verify their submission. The same goes for the marked and collected assignment. In addition, the lecturer will be informed to check the submission records of the students. By doing this, the assignment is always kept in safe condition after the submission. The proposed system also helps lecturer to keep track of their student submission. The lecturer can check the time of submission and enable the student to collect their assignment after being marked. This system will improve the management of student assignment at the institution.
TABLE OF CONTENT
Title page i
Certification ii
Dedication iii
Acknowledgment iv
Abstract v
Table of Content vi
CHAPTER ONE: INTRODUCTION
1.0: Introduction …………………………………………………………………………………… 1
1.1: Background of the study ……………………………………………………………………… 1
1.2: Problem statement …………………………………………………………………………….. 2
1.3: Objectives ………………………………………………………………………………………. 2
1.4: Scope of Project ………………………………………………………………………………… 3
1.5: Limitation of Project …………………………………………………………………………… 3
1.6: Significance of Study ……………………………………………………………………………. 3
1.7: Definition of Terms ……………………………………………………………………………… 4
CHAPTER TWO: LITERATURE REVIEW
2.0: Introduction ………………………………………………………………………………………. 5
CHAPTER THREE: RESEARCH METHODOLOGY
3.0: System Design ……………………………………………………………………………………… 10
3.1: System development life cycle of the project ……………………………………………….. 10
3.2: Preliminary analysis ………………………………………………………………………….. 10
3.3: Feasibility study ………………………………………………………………………………. 11
3.3.1: System analysis ……………………………………………………………………… 11
3.3.2: System design ………………………………………………………………………… 11
3.3.3: Development/coding …………………………………………………………………. 11
3.3.4: Testing ………………………………………………………………………………… 11
3.4: Use Case Diagram ……………………………………………………………………………… 12
3.5: Structure of database design ………………………………………………………………….. 13
CHAPTER FOUR: SYSTEM IMPLEMENTATION
4.0: Introduction ……………………………………………………………………………………… 16
4.1: Implementation tools ……………………………………………………………………………. 16
4.1.1: Javascript ………………………………………………………………………………. 16
4.1.2: PHP …………………………………………………………………………………….. 16
4.1.3: Apache Server ……………………………………………………………………………… 17
4.1.4: Macromedia Dreamweaver MX …………………………………………………………… 17
4.1.5: MySQL …………………………………………………………………………………. 17
4.2: Target computer system requirements ………………………………………………………………. 18
4.3: Software Maintenance Issues …………………………………………………………………………. 18
4.3.1: Corrective maintenance …………………………………………………………….. 19
4.3.2: Preventive maintenance …………………………………………………………….. 19
4.3.3: Adaptive maintenance ………………………………………………………………. 19
4.4: Display of Graphical Interface ………………………………………………………………………… 20
CHAPTHER 5: SUMMARY, CONCLUSION AND RECOMMENDATION
5.1: Summary ………………………………………………………………………………………………… 30
5.2: Conclusion ……………………………………………………………………………………………….. 30
5.3: Recommendation ………………………………………………………………………………………… 30
References
Appendix
CHAPTER ONE
1.1: INTRODUCTION
An online assignment handling is a system contained within the Module virtual learning environment. The functionality of the standard assignment handling module has been extended to cater for all the Department’s needs in terms of receiving assignments from students, making them available to tutors to mark, returning grades, comments and marked work to students and keeping Registry and course administrators informed at all stages of the process. Extension requests are an integral part of the system.
Universities, Polytechnics and colleges of education are considered the main provider of knowledge in various fields. Various courses of studies are taught in institutions, covering several fields including applied Sciences, Math, Computer, Human Resource, and Accounting. Most courses at universities consist of theoretical as well as practical subject matter. To evaluate the level of understanding and degree of comprehension among students, assignments are often given.
Assignments are submitted by students either individually or in groups. Assignment management involves collecting, marking, and redistributing to students. Tregobov (1998) breaks the process down into four stages: submission, recording, marking, and return. Online assignment submission and management (OASM) involves the use of the World-Wide Web, the Internet and computers to aid this process (Jones, 2003). With traditional assignment submission system, lots of problems arise especially when the students have to submit the answers of the assignment to the lecturer. There may be problems due to distance, time, or format of the assignment (written or printed). Also every learning process requires administrative support. Much of this administrative support is to some degree transparent but if the latter is not well organized it could disrupt the flow of learning between students and the staff.
1.2: BACKGROUND OF THE STUDY
As the educational world is moving faster and becoming more competitive, almost every university started to use an online submission system, or newer technologies to facilitate their task, to have more time, and to be in pace with this fast moving IT world.
This project is about designing and developing a client/server system to computerize assignment submission process in NATIONAL ASSOCIATION OF COMPUTER SCIENCE STUDENT, OGUN STATE INSTITUTE OF TECHNOLOGY, IGBESA. This system allows student to submit their assignment to the submission point and the system will record the information about the submitted assignment: Matric No, course code, assignment’s number and due date & time. The collection of the assignment is passed to the lecturer for the marking process. After finished marking, the lecturer passed the marked assignment to the submission point. The operator at the submission point will key in the submission code into the system one more time.
This system is important to replace the manual system that is used at NATIONAL ASSOCIATION OF COMPUTER SCIENCE STUDENT, OGUN STATE INSTITUTE OF TECHNOLOGY, IGBESA now. By developing this system, it is expected to overcome the problems of manual system that being used. The development of this system is needed because it provides a systematic method in managing the submission of student assignments. The deliverables are including client interface, client program, server interface, server program.
The aim of this system is to help the student and lecturer in submission their assignment processes.
1.3 PROBLEM STATEMENT
The problems arises from the manual system used at the NATIONAL ASSOCIATION OF COMPUTER SCIENCE STUDENT, OGUN STATE INSTITUTE OF TECHNOLOGY, IGBESA is that it has no record about the time of the student hand over their assignment. Due to this, some of the student might hand in their assignment later than the due timeIt is hard to search for the lose assignments because there is no record of who may responsible for taking it. The lecturer does not know whether all of his or her student has submits their assignment because there are lots of assignments to be collected. The lecturer find out about which student does not submit their works only after he or she finishes marking the assignment. By this time it was too late to know what exactly happens. After the lecturer finish marking the assignment and return it back, some student does not get their assignment back because they could find it anymore since anyone can take it.
1.4 OBJECTIVES
The main objective of this project is to create a paperless environment and automated system by developing a Computerized Assignment Submission System for NATIONAL ASSOCIATION OF COMPUTER SCIENCE STUDENT, OGUN STATE INSTITUTE OF TECHNOLOGY, IGBESA. In addition to assist the student, it also reduces unnecessary workload of lecturers.
Other objectives of the project are as follows:
- To make sure the student submit their assignment on time and safely.
- To help the lecturer know whether his or her student has submit their assignment on time as required and find out who does not submit their assignment.
- To let the student know that the lecturers have received their assignment safely and when the lecturer finish marking it, they can collect it again.
- To avoid the loss of assignment after the lecturer finish marking it, only the student can take his or her own assignment.
- To give a room for interaction among the lecturers and students also, among the students
1.5: SCOPE OF PROJECT
The scope for the computerized assignment submission system is at the NATIONAL ASSOCIATION OF COMPUTER SCIENCE STUDENT, OGUN STATE INSTITUTE OF TECHNOLOGY, IGBESA. The system will collect the assignment. The operator will pass all of the assignment to the lecturers to be marked. After the lecturers finish marking them, they passed the assignment back to the operator at the system administrator. The collection of the assignment will be kept at the administrator. The student can collect their assignment from the operator at the administrator.
1.6: LIMITATION OF STUDY
- Lecturers won’t be notified when assignment is submitted.
- Student still have access to submit assignment even after due time.
1.7: DEFINITION OF TERMS
Assignment: a task or piece of work allocated to someone as part of a job or course of study
Student: A student or pupil is a learner, or someone who attends an educational institution.
Online: online” indicates a state of connectivity.
Lecture: A lecture is oral presentations intended to present information or teach people about a particular subject, for example by a university or college teacher.
Submission: the action of presenting a proposal, application, or other document for consideration or judgment.
OAS: Online Assignment Submission
DISCLAIMER: All project works, files and documents posted on this website, UniProjectTopics.com are the property/copyright of their respective owners. They are for research reference/guidance purposes only and some of the works may be crowd-sourced. Please don’t submit someone’s work as your own to avoid plagiarism and its consequences. Use it as a reference/citation/guidance purpose only and not copy the work word for word (verbatim). The paper should be used as a guide or framework for your own paper. The contents of this paper should be able to help you in generating new ideas and thoughts for your own study. UniProjectTopics.com is a repository of research works where works are uploaded for research guidance. Our aim of providing this work is to help you eradicate the stress of going from one school library to another in search of research materials. This is a legal service because all tertiary institutions permit their students to read previous works, projects, books, articles, journals or papers while developing their own works. This is where the need for literature review comes in. “What a good artist understands is that nothing comes from nowhere. All creative work builds on what came before. Nothing is completely original.” - Austin Kleon. The paid subscription on UniProjectTopics.com is a means by which the website is maintained to support Open Education. If you see your work posted here by any means, and you want it to be removed/credited, please contact us with the web address link to the work. We will reply to and honour every request. Please notice it may take up to 24 – 48 hours to process your request.
