ABSTRACT
This study empirically examined the determinants of manufacturing firms’ financial performance in Nigeria using a panel data for 12 years across 10 manufacturing firms listed on the Nigerian Stock Exchange for the period 2004 to 2015. The effect of revenue reserves, interest paid on borrowings and tax paid were examined on net worth, profit after tax and return on asset.
The data was analyzed using descriptive and inferential analysis. The study was based on the microeconomic theory of production. The hausman test was used to determine the appropriateness of the fixed effect and random effect estimators that were employed. A robust check was carried out on the effect of borrowings.
The results revealed that the mean profit after tax, net worth and return on asset was N11,800,000,000, N67,200,000,000 and 10.441% respectively. From the panel regression estimates, revenue reserve had insignificant effect on net worth, profit after tax and return on asset. Tax paid had a negative significant effect on the net worth and profit after tax of manufacturing firms. However it had no significant effect on return on asset. The amount of borrowings had a positive significant effect on profit after tax and net worth of manufacturing firms. However, its effect on return on asset was insignificant. Interest paid on borrowings was not a significant determinant.
The study concluded that the high tax paid by the manufacturing firms significantly explain declines intheir financial performance. The amount of borrowings available to manufacturing firms determines improvements in their financial performance. Tax reductions and subsidies as well as greater access to borrowings are important for improving the financial performance of manufacturing firms.
Keywords: Financial performance, Manufacturing firms, Tax and Borrowings.
Word Count: 282
TABLE OF CONTENTS
Content page
Title Page i
Certification ii
Dedication iii
Acknowledgements iv
Abstract v
Table of Contents vi
List of Tables x
List of Figures xi
CHAPTER ONE: INTRODUCTION
- Background to the Study 1
- Statement of the Problem 2
- Objective of the Study 3
- Research Questions 3
- Hypotheses 3
- Scope of the Study 4
- Significance of the Study 4
- Justification for the Study 4
- Operational Definition of Terms 5
CHAPTER TWO: REVIEWOF LITERATURE
2.1 Conceptual Review 6
Content Page
2.1.1 Financial Performance 6
2.1.2 Measures of Financial Performance 7
2.1.3 Overview of Manufacturing Firms’ Financial Performance in Nigeria 7
2.1.4 Financial Performance Analysis 10
2.1.5 Working Capital Analysis 12
2.1.6 Financial Structure Analysis 13
2.1.7 Concept of Activity Analysis 16
2.1.8 Concept of Profitability 16
2.1.9 Techniques of Financial Performance Analysis 18
2.2 Theoretical Review 19
2.2.1 Theory of Production 19
2.2.2 Walker’s Theory of Profit 20
2.2.3 Clark’s Dynamic Theory 20
2.2.4 Hawley’s Risk Theory of Profit 21
2.2.5 Knights Theory of Profit 21
2.2.6 The Modigliani- Miller Theorem 22
2.2.7 Tobin Q Theory of Investment 22
2.3 Empirical Review of Literature 23
2.3.1 Review of Studies for Developed Countries 23
2.3.2 Review of Studies for Developing and Emerging Countries 25
2.3.3 Review of Studies for Nigeria 31
Content Page
2.4 Summary and Gap in Literature 37
CHAPTER THREE: METHODOLOGY
3.0 Introduction 38
3.1 Research Design 38
3.2 Population 38
3.3 Sources and types of data 38
3.4 Model Specification 39
3.5 Model Estimation Techniques 40
3.7 Ethical Issue 40
CHAPTER FOUR: DATA ANALYSIS, RESULTS
AND DISCUSSION OF FINDINGS
4.1 Data presentation 41
4.2 Data Analysis 51
4.2.1 Estimated results 52
4.2.2 Return on Asset 53
4.2.3 Profit after Tax 53
4.2.4 Robust Checks 54
4.2.5 Net worth 55
4.2.6 Return on Asset 55
4.3 Discussion of Findings 57
Content Page
CHAPTER FIVE: SUMMARY, CONCLUSION AND
RECOMMENDATIONS
5.1 Summary 60
5.2 Conclusion 60
5.3 Recommendations 61
5.4 Contribution to Knowledge 61
5.5 Suggestion for Further Studies 61
References 62
Appendices 67
LIST OF TABLES
Table Page
4.1 7UP Bottling Company 41
4.2 Cadbury Nigeria Plc 42
4.3 Unilever Nigeria Plc 43
4.4 Berger Paint Nigeria Plc 44
4.5 Guiness Nigeria Plc 45
4.6 Nascon Allied Industries Plc 46
4.7 Vitafoam Nigeria Plc 47
4.8 Flour Mills of Nigeria 48
4.9 Pz Cussons Nigeria Plc 49
4.10 Cutix Plc 50
4.11 Descriptive Statistics 51
4.12 Random Effect Estimates 52
4.13 Random Effect Estimates 53
4.14 Random Effect Estimates 54
4.15 Fixed Effect Estimates 55
4.16 Fixed Effect Estimate 56
4.17 Random Effect Estimate 57
LIST OF FIGURES
Figure Page
Return on asset (ROA) 8
Profit after tax (PAT) 8
CHAPTER ONE
INTRODUCTION
- Background to the Study
The manufacturing sector plays a catalytic role in a modern economy and has many dynamic benefits that are crucial for economic transformation. In a typical advanced country, the manufacturing sector is a leading sector in many respects. It is an avenue for increasing productivity related to import replacement and export expansion, creating foreign exchange earning capacity; and raising employment and per capita income which causes consumption patterns to increase (Ogar & Charles 2014). Furthermore, it creates investment capital at a faster rate than any other sector of the economy while promoting wider and more effective linkages among different sectors. In terms of contribution to the Gross Domestic Product (GDP), the manufacturing sector is dominant and it has been overtaken by the services sector in a number of organizations for Economic Co-operation and Development (OECD) countries (Anyanwu, 2003).
Before independence, agricultural products dominated Nigeria’s economy and accounted for the major share of its foreign exchange earnings. Initially, inadequate capital investment permitted only modest expansion of manufacturing activities (Ariyo, 2005). Early efforts in manufacturing sector were oriented towards the adoption of an import substitution strategy in which Light Industry and assembly related manufacturing ventures were embarked upon by the formal trading companies up to about 1970, the prime mover in manufacturing activities was the private sector which established some agro-based Light manufacturing units such as vegetable oil extraction plants, turneries tobacco processing, textiles, beverages and petroleum products (Ariyo, 2005). The strategy of light and assemblage manufacturing shifted somewhat to heavy industries from the period of the Third National Development Plan (1975-1980) when government intervened to establish Core Industrial Plants to provide basic imports for the downstream industries. The import dependent industrialization strategy virtually came to a halt in the late 1970s and early 1980s when the Liberal Import Policy expanded the imports of finished goods to the detriment of domestic production (Ariyo, 2005).
Using data from the CBN Statistical Bulletin 2015, an analysis of the contribution of manufacturing sector to the growth of the economy is thus presented.The contribution of manufacturing sector to total output (GDP) was 13% in 1982. A slight decline of 12% was recorded in 1984 and further declined by 3% in 1986. An increase to 15% was recorded in 1988 and huge increase of 33% was obtained in 1990. From 1991, it decreased by 3% in 1992 and by 1994 a further decrease of 2% was recorded. A huge increase of 46% was obtained in 1996. However, it declined by 12% in 1998. From 2000, the contributions of this manufacturing sector only increased by 3% and further increased to 8% in 2002. Further fluctuations have therefore been recorded as seen from an increase to 11% in 2004 and also increased by 9% in 2006. By 2010 an increase of 7% was recorded and further increased to 14% in 2015.
1.2 Statement of the Problem
Manufacturing sector is a leading sector in many respects. It is an avenue for increasing productivity related to import replacement and expansion, creating foreign exchange earning capacity and raising employment. In spite of continuous policy strategies to attract credits to the manufacturing sector, most Nigerian manufacturing enterprises have remained unattractive because of the various charges imposed by financial institutions and government causing reduction in the net worth of the firms. Despite the important role of the manufacturing sector in development, Nigeria is still backward as shown by the several declines of the manufacturing sector to the GDP. Also from the financial statement of some manufacturing firms, as seen in Nascon Allied Idustries Plc which recorded 37% of its return on asset in 2007 but declined to 13% in 2015. Nigerian Flourmill Plc recorded return on asset of 13% in 2007 and further declined to 1% in 2015. Cutix Plc recorded 19% of its return on asset in 2007 and further decreased to 8% in 2015.
Financial performance as assessed using ROA and PAT has shown that there is a great need for improvement and also to identify those specific factors that affects financial performance and the magnitude of their effect on manufacturing sector. By so doing there is a need to narrow down the financial performance of these manufacturing firms in order to get a clearer picture of financial activities of these firms. This is because this study is looking at the strength of these firms which can help to make a decision on its overall financial performance and sustainability.
There has been a large agreement that the poor financial performance of manufacturing firms usually threatens their long term existence and affects their operations in the short run (Lawal, Edwin,Monica & Adisa 2014). However, there has been less agreement as to which of the key financial performance indicators or variables are important to the continue survival of manufacturing firms (Olorunfemi, Tomola, Felix & Ogunleye 2013). This study will therefore examine those factors that affect the financial performance of manufacturing firms in Nigeria.
1.3 Objective of the Study
The main objective of this study is to examine the determinants of manufacturing firms’ financial performance in Nigeria. The specific objectives are to:
- estimate the effect of revenue reserve on manufacturing firms’ financial performance;
- analyze the effect of tax paid on manufacturing firms’ financial performance and
- estimate the effect of interest paid on borrowings on manufacturing firms’ financial performance.
- Research Questions
- What is the effect of revenue reserve on the financial performance of manufacturing firms?
- Does the tax paid have an effect on the financial performance of manufacturing firms?
- What effect does interest paid on borrowings has on financial performance of manufacturing firms?
- Hypotheses
The hypothesis was tested at 5% significance level.
H01 Revenue reserve has no significant effect on the financial performance of manufacturing firms.
H02The amount of tax paid has no significant effect on the financial performance of manufacturing firms.
H03The amount of interest paid on borrowings has no significant effect on the financial performance of manufacturing firms.
1.6 Scope of the Study
The study examined the determinants of manufacturing firms’ financial performance in Nigeria. The period for the study is from 2004 to 2015 and 10 manufacturing firms in the country was used including only firms in the consumer goods and industrial goods sector.
1.7 Significance of the Study
The significance of this study would help government to find appropriate measure of manufacturing firms’ financial performance and interest charged on the overall performance of the firms being minimized in order to meet the needs of the consumers. This would help to improve the role that manufacturing sector plays towards contributing to and enhancing the economic development of Nigeria. These roles include: provision of the essential finished goods required by Nigerians; earning of foreign reserves for Nigerian economy; creation of employment opportunities for Nigerian citizens and reducing the importation of the finished goods they produce.
1.8 Justification for the Study
Several studies on the manufacturing sector exist, however only a few has focused on financial performance of manufacturing firms. For example, Ogar and Charles (2014) examined the effect of commercial bank credit on the manufacturing sector output in Nigeria from 1992 to 2011 using manufacturing output to capture manufacturing sector performance. Olorunfemi et al. (2013) examined factors influencing manufacturing performance in Nigeria for the period 1980 to 2008 using economic growth to measure manufacturing performance which is a function of investment, capacity utilization, exchange rate, export and import.
Lawal et al. (2014) carried out an empirical study on the effect of capital structure on manufacturing firms’ performance in Nigeria for the period 2002 to 2012 using return on asset, return on investment as firms performance variable and performance as a function of debt-equity ratio, long term debt to capital employed ratio, total debt ratio and age.Lawrence & Sanusi (2014) explored the extent of target costing system adoption and implementation by manufacturing industry in South-Western Nigeria using firm performance in terms of profitability as a function of return on investment and reduction in the cost of production. However this study intends to focus only on financial performance of manufacturing firms in Nigeria for the period of 12 years (2004-2015).
1.9 Operational Definition of Terms
Manufacturing Firms: This is a commercial business that converts raw materials or components into finished products with the aid of machinery for the purpose of meeting customers demand.
Return on Asset: This is a percentage of profit after tax over total asset of the firm. This gives an idea as to how efficient management is at using its asset to generate earnings. It is an indicator of how profitable a company is relative to its total asset.
Net Worth: This is the difference between the assets and liabilities of the firm. It is a key measure of how much an entity worth showing asset owned minus any debt owed.
Bank Credit: This is the aggregate amount of credit available to a person or business from a banking institution. It is the total amount of funds financial institutions provide to an individual or business.
Financial Performance: This is a subjective measure of how well a firm can use assets from its primary mode of business and generate revenues. It shows the level of performance of a business over a specified period of time expressed in terms of overall profits and losses during that time.
DISCLAIMER: All project works, files and documents posted on this website, UniProjectTopics.com are the property/copyright of their respective owners. They are for research reference/guidance purposes only and some of the works may be crowd-sourced. Please don’t submit someone’s work as your own to avoid plagiarism and its consequences. Use it as a reference/citation/guidance purpose only and not copy the work word for word (verbatim). The paper should be used as a guide or framework for your own paper. The contents of this paper should be able to help you in generating new ideas and thoughts for your own study. UniProjectTopics.com is a repository of research works where works are uploaded for research guidance. Our aim of providing this work is to help you eradicate the stress of going from one school library to another in search of research materials. This is a legal service because all tertiary institutions permit their students to read previous works, projects, books, articles, journals or papers while developing their own works. This is where the need for literature review comes in. “What a good artist understands is that nothing comes from nowhere. All creative work builds on what came before. Nothing is completely original.” - Austin Kleon. The paid subscription on UniProjectTopics.com is a means by which the website is maintained to support Open Education. If you see your work posted here by any means, and you want it to be removed/credited, please contact us with the web address link to the work. We will reply to and honour every request. Please notice it may take up to 24 – 48 hours to process your request.
