Number of Pages: 58

File Size: 3101 KB

File Type: MS Word & PDF

Chapters: 1 - 5

5,000.00

TABLE OF CONTENTS

COVER PAGE …………………………………………………………………….. I

ABSTRACT ………………………………………………………………………..VI

LIST OF FIGURES ………………………………………………………………. XI

LIST OF TABLES………………………………………………………………….X

CHAPTER 1 ……………………………………………………………………………..1

INTRODUCTION

1.0 BACKGROUND INFORMATION OF THE STUDY…………………….….1

1.1 STATEMENT OF THE PROBLEM…………………………………………..2

1.2 OBJECTIVE……………………………………………………………………2

1.3 SCOPE OF THE STUDY………………………………………………………2

CHAPTER 2

LITERATURE REVIEW

2.0 INTRODUCTION ………………………………………………………………4

2.1 RELATED WORKS…………………………………………………………….4

2.2 Conventional Methods…………………………………………………………………7

2.3 Introduction to GSM Network…………………………………………………………10

2.3.1 Messaging Over GSM Network……………………………………………………..10

CHAPTER 3

DESIGN AND CONSTRUCTION PROCEDURE

3.0 Introduction…………………………………………………………………………12

3.1 System Description ………………………………………………………………….12

3.2 Design Analysis………………………………………………………………………………………………13

3.3 Power Supply Design…………………………………………………………………13

3.3.1 Transformer…………………………………………………………………………14

3.3.2 Bridge Rectifier……………………………………………………………………..15

3.3.3 Filtering Capacitors………………………………………………………………….16

3.3.4 LM317T Voltage Regulator…………………………………………………………19

3.3.5 LM7805 Voltage Regulator………………………………………………………….21

3.3.6 Battery Backup……………………………………………………………………….21

3.4 The Microcontroller Unit……………………………………………………………….22

3.5 Ds1307 Real Time Clock………………………………………………………………28

3.6 The AT24C512 EEPROM Module…………………………………………………….30

3.7 Keypad…………………………………………………………………………………..32

3.8 Display………………………………………………………………………………….34

3.8.1 The LED Indicator……………………………………………………………………..34

3.8.2 Interfacing The LCD With The Microcontroller………………………………………37

3.9 The Sim 800 GSM Module………………………………………………………………39

3.10 The Buzzer………………………………………………………………………………42

3.11 Selection Of Materials…………………………………………………………………..43

3.12 Construction Procedure…………………………………………………………………44

3.12.1 Printed Circuit Board (PCB)………………………………………………………….44

CHAPTER 4

4.0 RESULTS AND DISCUSSION…………………………………………………………46

CHAPTER 5

CONCLUSION………………………………………………………………………………52

REFRENCES ………………………………………………………………………………..53

 

LIST OF FIGURES

FIG. 3.1 System Block Diagram……………………………………………………………..13

FIG. 3.2 Full wave Bridge Rectifier …………………………………………………………14

FIG 3.3 Sine Wave Output Of Transformer ……………..…………………………………..15

FIG 3.4 Bridge Rectifier Circuit …………………………………………………………………………….16

FIG 3.5 Capacitor Filtering ………………………………………………………………….19

FIG. 3.6 Block Diagram of LM317T …………………………………………………………..20

FIG. 3.7 Block Diagram of LM7805………………………………………………………..21

FIG. 3.8 Regulated Power Supply Circuit …………………………………………………..22

FIG 3.9 Block Diagram of ATMEGA 32……………………………………………………23

FIG. 3.10 Block Diagram of the AVR MCU Architecture………………………………….27

FIG. 3.11 ATMEGA 32 with Serial Peripherals……………………………………………27

FIG.3.12 DS107 Block Diagram……………………………………………………………29

FIG.3.13 Real Time Clock Circuitry………………………………………………………..29

FIG.3.14Block Diagram of AT24C512……………………………………………………..31

FIG.3.15 EEPROM Module…………………………………………………………………32

FIG. 3.16 Keypad…………………………………………………………………………….33

FIG. 3.17 Matrix Keypad Connections………………………………………………………34

FIG. 3.18 LED Schematic Symbol And I-V Characteristics Curves Showing The Different Colours Available…………………………………………………………………………………………………….35

FIG. 3.19 LED SERIES RESISTOR CIRCUIT …………………………………………35

FIG. 3.20 LED CIRCUIT………………………………………………………………………..36

FIG 3.21 Block Diagram And Power Supply……………………………………………38

FIG 3.22 LCD…………………………………………………………………………….39

FIG. 3.23 SIM900 GSM/GPRS Module………………………………………………….40

FIG. 3.24 SIM 800 MODEM……………………………………………………………..41

FIG. 3.25 Frequency Characteristics………………………………………………………42

FIG. 3.26 The Buzzer……………………………………………………………………..43

ABSTRACT

The world over the decades has made considerable advancement in automation; automation is employed in every sector whether it is home or industry. The need for an automatic school/college bell is now a necessity which has been evolved with the revolution in technology and boost in the education system where time is a major factor affecting the educational system where the time has to be accurate. Here a new and inexpensive design is being presented. This design finds a tremendous use at primary and secondary school levels as well as in colleges where the teaching sections can span over several periods including breaks. The advantage of this design is that the bell rings at the start of each period without any human intervention to a great degree of accuracy and hence takes over the manual task of switching on/off the college bell or ring a bell manually with respect to time. The proposed college time keeper uses a Real Time Clock (DS1307) which tracks the real time, the school time table programmed to the system via a keypad and phone numbers of subject teachers registered to the system memory using EEPROM. The system has the GSM technology backbone used for SMS notification to subject teachers prior to the time scheduled for the class, this takes away the excuse of forgetting. With a battery power backup, the system can rule when power supply cuts.

CHAPTER ONE

INTRODUCTION

1.0 BACKGROUND INFORMATION OF THE STUDY

Today, humanity can be classified as living in a “machine society” where technological tools are predominantly at different levels, interfacing in the day–to-day activity of man. These livelihood activities constitute and deliver economic, social and political benefits and potential risks to the survivability of nations –especially developing nations like ours.

In today’s world where time is money it can be wasted on Operating manual things and one of the most common would be school/college bell which has to be operated hour after hour and which is also not accurate and requires the use of manpower this can be easily overcome by using a fully automatic system which is operated using a microcontroller where the college bell is operated fully automatic and doesn’t requires any manpower and which is much more accurate than the one which is operated manually. It replaces the manual switching of the bell in the college. The time table schedule for schools many a times coincide with one another, and may confuse class clashes, the system of ringing bells manually for this class when a teacher may be present in a class is not efficient providing the technological advantage of the proposed system of college time keeper

Technology today aims at reducing the human efforts and promoting better living and cost effective, safe and convenient methods. Thus the idea for this project is born. This project proposes a novel approach to time keeping for subject/ lecture time tables for schools as pre-registered in the system, upon the time for a new class, the system automatically rings the bells, and sends SMS reminder to subject teacher minutes prior to class, providing efficiency and reducing human effort in the process.

1.1 STATEMENT OF THE PROBLEM

In today’s life, everyone gives importance to time. Time does not wait for anybody. Everything should be performed in time & with accuracy. Due to literacy awareness number of colleges and schools are rapidly increasing. In present system, bell for period or break are operated manually. After every class, anemployee or student is engaged in ringing the bell. Inaccuracy, Human error and inconsistency are the drawbacks of manual system. Hence there is a big question of accuracy. There also are cases where a subject teacher may have forgotten he or she is to take a class at a particular time, this brings about lost hours and deficiency in student class activity, so there comes the need to have a system that can take proper and efficient time monitoring and notify a subject teacher minutes prior to the class of a scheduled class in the school time table as saved on the system

1.2 OBJECTIVE

This project is aimed at producing a cheap and reliable device with the aim of designing and constructing an electronic device capable of monitoring the time table schedule of a school and ring the bell for each class in order to sustain the adequate, timely and indispensable management of time for the continuous flow of activities in the school. As well an SMS notification system for subject teachers. Using the robust available GSM technology. The system will run round the clock regardless of power outage as a backup battery will be incorporated in the design.

 

1.3 SCOPE OF THE STUDY

Within the scope of this project, the prototype model of the college time keeper will be equipped a real time clock and GSM modem for time monitoring which will be entered via a keypad and LCD system, the alarm system will be an electromagnetic buzzer and SMS notification. The time is display on LED Scrolling Display Board. Using this project we implement the idea of wireless communication between a college time keeper and mobile phone. This project include the following main components:

  • ATMEL ATMEGA 32 Microcontroller
  • GSM modem-SIM 800
  • Real Time Clock
  • EEPROM
  • LED and LCD display
  • Keypad
  • Buzzer

DOWNLOAD THE FULL WORK

DISCLAIMER: All project works, files and documents posted on this website, UniProjectTopics.com are the property/copyright of their respective owners. They are for research reference/guidance purposes only and some of the works may be crowd-sourced. Please don’t submit someone’s work as your own to avoid plagiarism and its consequences. Use it as a reference/citation/guidance purpose only and not copy the work word for word (verbatim). The paper should be used as a guide or framework for your own paper. The contents of this paper should be able to help you in generating new ideas and thoughts for your own study. UniProjectTopics.com is a repository of research works where works are uploaded for research guidance. Our aim of providing this work is to help you eradicate the stress of going from one school library to another in search of research materials. This is a legal service because all tertiary institutions permit their students to read previous works, projects, books, articles, journals or papers while developing their own works. This is where the need for literature review comes in. “What a good artist understands is that nothing comes from nowhere. All creative work builds on what came before. Nothing is completely original.” - Austin Kleon. The paid subscription on UniProjectTopics.com is a means by which the website is maintained to support Open Education. If you see your work posted here by any means, and you want it to be removed/credited, please contact us with the web address link to the work. We will reply to and honour every request. Please notice it may take up to 24 – 48 hours to process your request.

WeCreativez WhatsApp Support
Administrator (Online)
I am online and ready to help you via WhatsApp chat. Let me know if you need my assistance.