| TABLE OF CONTENTS | |||
| Declaration | iii | ||
| Certification | iv | ||
| Dedication | v | ||
| Acknowledgements | vi | ||
| Table of contents | vii | ||
| List of Abbreviation | ix | ||
| List of Tables | x | ||
| List of Figures | xi | ||
| Abstract | xiii | ||
| CHAPTER ONE: INTRODUCTION | 1 | ||
| 1.1 | Background to the Study | 3 | |
| 1.2 | Statement of the Problem | 4 | |
| 1.3 | Objectives of the Study | 4 | |
| 1.4 | Scope of the Study | 4 | |
| 1.5 | Research Methods | 5 | |
| 1.6 | Significance of the study | 5 | |
| 1.7 | Thesis arrangement | 6 | |
CHAPTER TWO: LITERATURE REVIEW
2.1 Renewable Energy Source (Res) 7
2.2 Photovoltaic Energy System 7
2.2.1 Photovoltaic Arrangement 8
2.2.3 PV Cell 9
2.2.4 PV Array 10
2.2.5 Working of PV Cell 10
2.2.6 Modelling of Pv Cell 11
2.2.7 Okundamiya et al. Model 16
2.3 Wind Energy and Power 16
2.3.1 Wind Turbine 18
2.4 Hybrid Power Systems 21
2.4.1 HPS Design 24
2.4.2 HPS design optimization 24
2.5 HOMER 26
2.5.1 What does HOMER do? 27
2.5.2 HOMER and NPC 27
CHAPTER THREE: RESEARCH METHODS 29
3.1 Study Location and Meteorology 29
3.2 Data Collection Analysis 30
3.2.1 Load Data 30
3.2.2 Meteorology Data 30
3.2.3 Technical and Economic Data 30
3.3 Design and Simulation of the Wind-Solar Hybrid Energy System 36
CHAPTER FOUR: RESULTS AND DISCUSSION 38
4.1 Results 38
4.2 Discussion 40
4.3 Findings 41
CHAPTER FIVE: CONCLUSION 43
5.1 Conclusion 43
References
LIST OF ABBREVIATIONS
PV – Photovoltaic
HOMER – Hybrid Optimization Model for Electrical renewable
NIMET – Nigeria Meteorological
NASA – Nations Aeronautics and Space Admiration
RES – Renewable Energy sources
VOC – Voltage of cell
HPS – Hybrid Power System
AC – Alternating Current
DC – Direct Current
SSC – System Supervisory Control
WTG – Wind Turbine Generator
DG – Diesel Generator
CAPEX – Capital Expenses
OPEX – Operation Expenses
NPC – Net Present Cost
TAC – Total Analyzed Cost
SV – Salvage Costs
R D – Research and Development
| LIST OF TABLES | ||
| Table 2.1: | Parameters of the PV array at 25oC, 1000w/m2 | 16 |
| Table 2.2: | Overview of simulation tools | 25 |
| Table 3.1: | Geographical coordinates of the study location | 29 |
| Table 3.2: | Energy consumption a functional mobile telecommunication site at Agbor | 30 |
| Table 3.3: | Main characteristics of datasets collected from the Nigerian Meteorological | |
| agency (Okundamiya et al., 2014b) | 31 | |
| Table 3.4: | Technical/Economic parameters for sizing the wind-solar hybrid energy | |
| system | 34 | |
| Table 4.1: Simulation results of the possible configurations of the designed hybrid energy | ||
| system based on the net present cost | 38 | |
| Table 4.2: | Electrical characteristics of proposed (wind-solar-battery) hybrid system | 39 |
| Table 4.3: | Summary of total net present cost of the designed wind-solar hybrid system | |
| components | 39 | |
| Table 4.4: | Comparison of pollutant emissions from diesel generator source with various | |
| hybrid system options at study location | 40 | |
| LIST OF FIGURES | |||
| Figure 2.1: | Overall block diagram of PV energy system | 8 | |
| Figure 2.2: | Structure of PV Cell | 9 | |
| Figure 2.3: | Photovoltaic system | 10 | |
| Figure 2.4: | Working of PV cell | 11 | |
| Figure 2.5: | Equivalent circuit of Single-diode modal of a solar cell | 11 | |
| Figure 2.6: | Representation of PV module | 14 | |
| Figure 2.7: | I-V and P-V characteristics of PV module | 15 | |
| Figure 2.8: | Air moving with velocity V m/s towards area A m2 | 17 | |
| Figure 2.9: | Drawing of the rotor and blades of a wind turbine (courtesy of ESN) | 19 | |
| Figure 2.10: | Power curve of a typical wind turbine | 20 | |
| Figure 2.11: | Basic topology of a hybrid power system | 21 | |
| Figure 2.12: | HPS possibilities (Manwell and McGowan, 2002). | 22 | |
| Figure 2.13: | Solar-wind hybrid power system | 24 | |
| Figure 3.1: | Map of the study location | 29 | |
| Figure 3.2: | Seasonal load profile of the studied mobile telecommunication site | 30 | |
| Figure 3.3: | 20-years (1986–2005) monthly average daily solar resources (radiation and | ||
| clearance index) for study site | 32 | ||
| Figure 3.4: | 10-years (2003–2012) monthly average daily wind speed (measured at a | ||
| height of 10 m above sea level) for study site. | 33 | ||
| Figure 3.5: | Power profile of Wind Turbine Generator used in this study (Okundamiya and | |
| Omorogiuwa, 2016) | 33 | |
| Figure 3.6: | Architecture of the designed wind-solar hybrid energy system | 36 |
| Figure 4.1: | Average monthly electrical production of the designed wind-solar hybrid | |
| system | 39 | |
ABSTRACT
The aim of this study is to design and simulate a hybrid energy system for reliable and cost – effective power supply to mobile telecommunication sites in developing cities. The Hybrid optimization model for electric renewable (HOMER) software was utilized to design the wind-solar hybrid energy system. Long-term wind speed and solar radiation data were collected for the study location in Nigeria from the archives of the Nigerian Meteorological agency and the Nations Aeronautics and Space Admiration respectively. Simulations were carried out for one-year period, by making energy balance calculations based on HOMER software using long-term meteorological data and the load profile of a practical mobile telecommunication site load installed at Agbor, Delta State. Simulation results showed that the optimized wind-solar-battery hybrid system, which consists of 14 kW PV arrays, 15 kW wind turbine generators, 5 kW power electronic converter and 110.98 kWh battery bank, gives the lowest cost of US$ 0.165 (N51.23) per kWh of energy consumed but with 3% annual capacity shortage compared to diesel-alone US$ 0.479 per kWh (N 148.73 per kWh), wind-diesel-battery (N 65.83 per kWh), solar-diesel-battery (N 78.56 per kWh), and solar-wind-diesel-battery hybrid systems (N 51.85 per kWh). In addition, the application of the designed hybrid energy system could eliminate the greenhouse gas emissions of mobile telecommunication sites resulting from the use of diesel generators and thereby making the environment greener and safer.
CHAPTER ONE
INTRODUCTION
- Background to the Study
The rising costs of energy and carbon footprint of operating mobile telecommunication sites in the developing countries have increased research interests in renewable energy technology. The renewable energy system design usually integrates renewable energy mix, such as biomass, wind and solar energy. Nevertheless, large area of land, water usage, and social impacts often characterize the electricity production from biomass, and this requires further study to verify the techno-economic viability of its power generation (Okundamiya, 2015). Consequently, it may be required to shift demand to other energy sources, such as wind and solar. Wind and solar energy are ubiquitous and freely available. These are used sources for renewable energy generation because are both technically and environmentally viable options.
Wind energy is one of the most viable and promising sources of renewable energy globally. Accurate estimate of wind speed distribution, selection of wind turbines, and the operational strategy and management of the wind turbines are essential factors that affect the wind energy potential. The first steps a utility company considers when deploying wind as an energy source is to examine the available wind speed (Okundamiya and Nzeako, 2013). The next step is to adjust the wind speed data at anemometer height to wind turbine hub height using appropriate conversion ratio. The adjustment of the wind profile is necessary to account for the effects of the wind shear inputs. Moreover, accurate assessment of wind power potential at a site requires detailed knowledge of the wind speeds at different heights (AI Abbadi and Rehman, 2009, Rehman and Ai- Abbadi, 2009). Methods are available in the literature for improving the estimate of the hub height wind resource (Lackner et al, 2010). The solar photovoltaic (PV) system is a clean source of power, which does not emit greenhouse gasses.
The performance of the photovoltaic conversion system is highly dependent on its orientation and period of service (Yang and Lu, 2007). The orientation of the PV surface is described using its tilt angle and the azimuth, both relate to the horizontal. This creates the problem of designing the optimum tilt angle for harvesting solar energy at fixed latitudes, as this is essential for effective harnessing and utilization of global solar radiation (Okundamiya et al, 2014a). In general, there are two steps in determining the available solar energy when supplying a remote load. The first step involves the determination of the amount of solar radiation that arrives on the earth at the PV panel’s location. The next step is modelling of the panel itself, considering its efficiencies, losses and physical orientation. Each step requires a model that deals with many variables, and inputs into the second stage of the model utilize the results of the first step. Using the available solar radiation at the tilted PV surface, the air temperature, and manufacturers data for a PV module as input parameters, the power output of the PV module can be deduced (Markvard, 2000).
There has been outstanding interest in the optimal design and management of stand-alone hybrid energy systems with the aim of achieving energy balance between the maximum energy captured and consumed energy (Kalantar and Mousavi 2010). The fluctuating renewable energy supplies, load demands, and the non-linear characteristics of some components complicate the design of hybrid systems. In addition, the overall assessment of autonomous hybrid energy systems that incorporate renewable and convectional energy sources depends on economic and environmental criteria, which are often conflicting objectives. The technical constraints in hybrid energy systems relate to system reliability. Several reliability indices have been employed for the evaluation of generating systems in the literature. The most technical approaches used for the evaluation of power system reliability are the loss of load probability, loss of load power supply, and loss of power supply probability.
The various methods for fixing hybrid energy systems are classified as follows (Zhou et al., 2010): simulation and optimization software and optimization methods. Hybrid optimization model for electrical renewable (HOMER), a computer- based model is the most widely used simulation software for the design options, which makes it easier to assess the techno-economic benefits of different power system configurations. Unlike other simulation, HOMER allows for comparison with different design options based on technical and economic merits, as a result, (Talebhagh and Kareghar, (2012)), (Teoh et al.2012) and (Okundamiya et al. (2014b)) have used this tool for the design, management and sizing of hybrid energy systems.
- Statement of the Problem
The rapid growth of mobile telecommunications in Nigeria creates a number of problems such as network congestion and poor quality of service delivery. These problems are fast eroding the gains of the Nigeria mobile telecommunication sector (Okundamiya et al. 2014). Lack of a reliable electric power grid and the cost implication of a supplementary energy source are major problems besetting this sector in most developing countries, particularly as network operators strive to expand their communications network to provide global coverage with increased quality of service. Most mobile telecommunication sites in the developing regions rely heavily on the use of fossil-fuel led generations either as supplements to the electric power grid or exclusively in remote locations.
The use of fossil-powered solution at mobile telecommunication sites presents a number of economic, logistical, and environment problems (Okundamiya et al., 2014b). The operation and maintenance of fossil-fueled generators account for about 78% of the total cost of operations (equivalent to about 35% of the cost of ownership) of the mobile telecommunication sites (Adegoke and Babalola, 2011). In addition, studies by ( Kovates et al.
(2005)), VandeWeghe and Kennedy (2007) and Rahmstorf (2008) indicate that the earth’s climatic change is the result of increasing concentrations of greenhouse gases resulting primarily from fossil fuel combustion into the atmosphere, yet Nigeria’s grid electricity supply is characterized by high unreliability index (Ogujor, 2007). Besides, the current and future demand patterns of energy are not sustainable (Oyedepo, 2012). Sustainable energy provides accessible, affordable, and reliable energy service that improve the socio-economic and environmental standards within the overall developmental context of the society while recognizing equitable distribution (Davidson, 2002).
- Objectives of the Study
The overall aim of this study is to design and simulate a wind-solar hybrid energy system for reliable and cost-effective power supply to mobile telecommunication sites in developing cities. The objectives of this study are to:
- design a wind-solar hybrid energy system for mobile telecommunication sites in developing cites;
- simulate and determine the optimum capacity of the wind-solar hybrid energy system for reliable and cost-effective power supply;
- determine the viability of the proposed wind-solar hybrid energy system.
- Scope of the Study
The hybrid energy systems discussed in this study are designed to supply power to outdoor mobile telecommunication sites consuming up to 3KW of power continuously. The outdoor mobile telecommunication sites consume lesser energy compared to traditional sites. It is worthy of note that the use of energy efficient is essential to attaining renewable energy solution.
- Research Methods
The methods proposed to achieve the set objectives for this study are:
- theoretical approach was applied in the design of the wind-solar hybrid energy system. Load data of a typical outdoor mobile telecommunication sites was collected from MTN, Nigeria. Long-term meteorological (wind speed and solar radiation) data were collected for the study location in Nigeria from the archives of the Nigerian Meteorological (NIMET) agency, Oshodi, Lagos State and the Nations Aeronautics and space Admiration (NASA) respectively. The data set was analyzed and evaluated using stochastic methods.
- Hybrid optimization model for electric renewable (HOMER) softer will be utilized to simulate the wind-solar hybrid energy system. The optimum capacity of the hybrid energy system for reliable and lost-effective power supply is determined by making energy-balance calculations based on HOMER.
- The viability of the proposed hybrid energy system will be determined based on sensitivity analysis. Sensitivity analysis isperformed on the system by varying system design parameters. Three key performance indices (power supply reliability, cost of energy, and emission reduction) was applied to evaluate the overall performance of the proposed hybrid energy system over existing diesel energy generation system
- Significance of the study
Renewable technologies are essential components of sustainable development mainly because of the following reason (Okundamiya et al., 2014c). Firstly, these are eco-friendlier than other sources as such extensive utilization of the renewable option will help in making the environment friendlier and safe. Secondly, these are non-exhaustible and if properly utilized in appropriate application, willcan provide a reliable and sustainable supply of energy
almost indefinitely. Thirdly, these favour system decentralization and local solution that are somewhat independent of the electric power grid. This enhances the flexibility of providing enormous benefits to small isolated populations.
The hybrid renewable energy systems are capable of providing the needed energy for sustainable economic development in the mobile telecommunication sectors but critical issues on the enabling technologies are yet to be resolved (Zhou et al., 2010). The intermittent nature of most renewable energy sources creates the problem of designing the optimum configuration for a given location, the use of renewable energy system as an alternative to fossil –powered source can reduce the unit cost of power, but the range of financial benefits depends on the geographical coordinates (Okundamiya and Omorogiuwa, 2015). The reason is that the renewable energy depends highly on weather conditions. Moreover, the viability of a hybrid energy system is a function of the configuration, which depends on the size or allocated capacity, mix of power source and the dispatch strategy. It is worthy of note that the operational specifications of renewable energy systems are location dependent (Okundamiya et al., 2014). Potential investors are at a cross road on the choice of system design configuration, optimum specifications, capacity projections and the techno-economic implications. In addition, renewable energy solutions are not commonly used for powering mobile telecommunication sites in Nigeria presently. Consequently, more research work on hybrid energy systems and the enabling technology for a sustainable economic development is needed
- Thesis Arrangement
Chapter 1 discusses the introduction, aims and objectives of the study. Chapter 2 reviews related literature relevant to this study. The chapter 3 describes the meteorology of the study area, data collection, design and analysis as well as a case study simulation. The results are presented and discussed in chapter 4 while chapter 5 gives the conclusion and recommendations of the study.
DISCLAIMER: All project works, files and documents posted on this website, UniProjectTopics.com are the property/copyright of their respective owners. They are for research reference/guidance purposes only and some of the works may be crowd-sourced. Please don’t submit someone’s work as your own to avoid plagiarism and its consequences. Use it as a reference/citation/guidance purpose only and not copy the work word for word (verbatim). The paper should be used as a guide or framework for your own paper. The contents of this paper should be able to help you in generating new ideas and thoughts for your own study. UniProjectTopics.com is a repository of research works where works are uploaded for research guidance. Our aim of providing this work is to help you eradicate the stress of going from one school library to another in search of research materials. This is a legal service because all tertiary institutions permit their students to read previous works, projects, books, articles, journals or papers while developing their own works. This is where the need for literature review comes in. “What a good artist understands is that nothing comes from nowhere. All creative work builds on what came before. Nothing is completely original.” - Austin Kleon. The paid subscription on UniProjectTopics.com is a means by which the website is maintained to support Open Education. If you see your work posted here by any means, and you want it to be removed/credited, please contact us with the web address link to the work. We will reply to and honour every request. Please notice it may take up to 24 – 48 hours to process your request.
